;
NEW PRODUCT OFFERINGS from TECH - one step away from all your tire and wheel service needs

745   Industrial Hand Towels
  • Clean your hands, equipment and tools
  • Made of gritted polypropylene
  • Contains both lanolin and a rust preventative
  • Towels are silicon free
  • Will remove grease, tar and many other hard to remove substances
  • 60 - 9" x 12" pre-moistened towels
View the catalog page for 745.
100   Tech Cabinet
  • The original Tech #100 cabinet has been re-designed to make it more user friendly
  • Double hinged locking doors with the Tech oval on the front of each door
  • Wider and taller shelves inside the cabinet to accommodate larger Uni-Seal boxes
  • One additional shelf was added to the outside of the cabinet
  • Slots to hang air tools along the additional shelf on the outside
  • Dimensions: 30" tall, 24" wide and 11.5" deep
  • The cabinet weighs 27 lbs. and 7 oz
View the catalog page for Tech 100 Cabinet.

Dill Redi-Sensors, Universal Sensors and Accessories
  • Work with exisiting TPMS scan tools - no new scan tool investment required
  • No extra steps for programming the sensor
  • Two SKUs cover 90% of GM, Ford and Chrysler - Tech item numbers TPMS7001 (315MHz) and TPMS7004 (433MHz)
  • Two SKUs designed to cover European and Asian vehicles - Tech item numbers TPMS1204A and TPMS1206A
  • Reduced inventories which eliminates service delays
  • OE Designed and validated
  • Click here to see a video of the Redi-Sensor on Youtube.com
Click here for a list of Dill Redi-Sensors, Universal Sensors and accessories available from Tech

UWT1000   Ultimate Hammer and Wheel Weight Removal Tool
  • U.W.T. Tools are the ultimate tools for removal and application of all wheel weights
  • U.W.T. Tool designs make it possible to remove wheel weights quickly and easily without touching the wheel
  • Eliminates the possibility of scratching the wheel
  • U.W.T. Tools remove wheel weights from tires that have curb protector rubber with ease.
  • Comes standard with series #5 hooks, single two-hole hook in the head, and double sided three-hole hook in the handle. It can be used with #5, #6 or #7 hooks.
  • How To / Demo Video: UWT1000 Video
View the catalog page for UWT1000.

UWT2000   Sidekick With Double Hooks
  • For removal of wheel weights. Comes standard with #6 and #7 three-hole hooks. Can use with double sided three-hole #5, #6 or #7 hooks.
View the catalog page for .

UWT3000   Sidekick (Core Remover)
  • For removal of valve cores and wheel weights. Comes standard with #5 double three-hole hook. Can use with double sided three-hole #5, #5 or #7 hooks.
View the catalog page for .

KEN32109   9" Motorcycle Tire Iron
  • Pro tire changing tool for small tires.
  • Ideal for mounting and demounting motorcycle, ATV, lawn tractor, golf cart and small tires by hand.
  • Rounded ends will not pinch the tube.
View the catalog page for KEN32109.

TSN100   Skirt Nut For 22mm Studs
  • Stops wheel / hub vibrations and many tire wearing problems.
  • No more loose wheels - stops wheel movement (clocking) on the face of the hub.
  • Eliminates wasted fuel caused by rolling resistance - "drag".
  • Meets and exceeds Standards of SAEJ1965 for torque tension.
  • Replaces all style M22 flange nuts on hub-piloted wheels.
  • Special graphite coating prevents the nut from rusting onto the hub.
  • Fills in the gap between the stud and the bolt hole.
  • Skirt Nut's flange washer takes over 2,500 lbs. of force to pop off the nut which is 50 times more than standard 22 mm flange washers!
  • Extended threading allows the Skirt Nut to go down into a Hub-Piloted Disc Wheel an extra 3/16" (5 mm) into the stud hole.
  • NOTE: As with all wheel attaching parts, Skirt Nut must be torqued to meet manufacturers specs according to OSHA Regulation: 29CFR1950.177 "Servicing Single Piece Wheels".
  • IMPORTANT: To maintain correct clamping force, improve tire wear and eliminate the risk of wheel loss, 10 Skirt Nuts per wheel are required.
View the catalog page for TSN100.

Sirco Wheel Attaching Parts for Trucks, Trailers and Tractors

Since 1985, Sirco Industries, Inc. has been specializing in heavy duty truck parts relating to wheels, brakes, axles and suspensions.

View the full list of Sirco products.

TRI20008   TPMS Style Replacement Stem

View the catalog page for TRI20008.

EP2244 and EP2245   Dura-Grip Disposable Latex Glove
  • 60% stronger than standard latex gloves.
  • Fully textured for superior grip wet or dry.
  • Superior dexterity.
  • Powder free.
View the catalog page for EP2244.
View the catalog page for EP2245.

EP5644 and EP5645   Nitrile Disposable Chemical Resistant Glove
  • Powder free.
  • Puncture resistant.
  • Resists: solvents, paint thinner and petro chemicals.
  • Exclusive soft nitrile formula reduces hand fatigue.
View the catalog page for EP5644.
View the catalog page for EP5645.

EP6644 and EP6645   Nitrile "PLUS" Disposable Glove
  • Powder free and latex free
  • Fully textured surface.
  • Extra protection for hand and upper arm.
  • EPPCO's thickest and longest disposable glove.
View the catalog page for EP6644.
View the catalog page for EP6645.

EP8544 and EP8545   Stronghold Reusable Glove
  • Chemical resistant palm.
  • Fully textured surface.
  • Extra protection for hand and upper arm.
  • EPPCO's thickest and longest disposable glove.
View the catalog page for EP8544.
View the catalog page for EP8545.

EP9944 and EP9945   Black Gold Nitrile Disposable Glove
  • Powder free.
  • Textured fingers.
  • Formulated to have elastic feel of latex with the strength of Nitrile.
  • Delivers unmatched tactile feel and sensitivity.
View the catalog page for EP9944.
View the catalog page for EP9945.



Click here for the new product archive